Digiprog 3 Odometer Programmer FAQ

Auto Tools FAQs.

Digiprog 3 Odometer Programmer FAQ

Postby Emily » Mon Aug 11, 2014 9:09 am

Q1: When I connect Digiprog 3 with computer, I got error "DiagProg3.Setup GetByte_USB-TimeOut".
cant-connect-computer-2.jpg
cant-connect-computer-2.jpg (32.82 KiB) Viewed 1307 times

A1: Only when you want to update Digiprog3, you can connect Digiprog3 with computer. At other times, don't connect Digiprog3 with computer.

Q2: I download eeprom from digiprog3 v4.82 and store it in the computer, it fails to connect the software and the USB driver is successfully installed, but diprog3.exe found no hardware, it needs to store eeprom file, but the memory is full.
A2: Sorry, digiprog v4.82 needs no connect with the computer, unless it needs to update.

Q3: You say Digiprog3 can't connect with the computer, then what is the "setup.exe" used for? Where is the USB cable to be connected? How to supply power? After plug the OBD cable into the car, Digiprog 3 suggests insert No.1 cable, do I have to remove dashboard?
A3: 1) Do not install the CD-ROM software "setup.exe".
2) When you want to update digiprog3, connect the USB cable to the computer.
3) It doesn't need power cord if the digiprog3 is directly connected to the car, the car will supply power for digiprog3.
4) After you plug the OBD cable (16pin cable), digiprog3 suggests you insert NO.1 cable, it means you have to use ST01 cable, not OBD cable.

Q4: I found Digiprog 3 power supply is not 220V, does it matter?
A4: Generally speaking, Chinese power input 110-220V, digiprog 3 power input 110-220V and power output 12V.

About Errors That Occur During Usage

Q1: How to select the language what I want.
A1: Digiprog 3 DVD is German, but the operation is available with both English and German, after you turn on Digiprog 3, click "language" option to set.

Q2: With digiprog 3, how to convert KM to miles?
A2: Our odometer programmers change the mileage value in KM, if your car mileage value is in miles unit and it becomes into KM unit after programmed, go to reset back in miles unit in the dashboard menu.

Q3: what is Digiprog III power-on password?
A3: Digiprog 3 Power-on password is 1. After enter password "1", click tick" √"not " X", otherwise Digiprog3 will freeze.

Compared with the Other Products

Q1: What is the difference between tacho pro 2008 and digiprog 3?
A1: tacho pro 2008 and digiprog 3 share the same function. But tacho pro works with the car before 2006 year, digiprog 3 works with the car even up to 2012 year.

Q2: Can I use Digiprog3 ST01 cable and ST04 cable to work with Yanhua brand Digiprog 3(item No.MP0302)?
A2: Yes, you can, but Yanhua brand Digiprog 3(item No.MP0302) is better use this following adapter in the package, it works better and more stable.

By What Ways to Do Cars

Q1: When I use digiprog3 to program mileage for 2011 beetle and 2007 mariner, I got error "No connection", I use 16pin OBD cable.
no-connection-by-obd-1.jpg
no-connection-by-obd-1.jpg (23.39 KiB) Viewed 1307 times

A1: It means you can't do via OBD way, you have to use the other way to do.

Q2: When I use digiprog3 to program mileage for BMW X5 2002 and 2006, I got error "No connection", I directly plug 16pin cable into the car to do.
no-connection-by-obd-bmw.jpg
no-connection-by-obd-bmw.jpg (24.29 KiB) Viewed 1307 times

A2: You car model can't do via OBD2, try to use the other way to do, like: remove dashboard or chip

Q3: How to use the following adapter of Digiprog 3? How to weld the connector in the red circle?
how-to-connect-cable.jpg
how-to-connect-cable.jpg (63.24 KiB) Viewed 1307 times

A3: Please read carefully the .pdf manual in the CD, you will know how to use and how to weld, there are corresponding interface in some car models' dashboard, just put the connector in the red circle into the corresponding interface.

Q4: How to use Digiprog3 to change mileage for Renault BSI?
A4: After select the car model, you will be suggested what adapters to need, some Renault models can be done by OBD way, some ones need to remove chip.
Emily
 
Posts: 34
Joined: Sat Apr 19, 2014 9:33 am

Return to Forum Help and Discussion

Who is online

Users browsing this forum: No registered users and 1 guest

cron